Tuning-Procedere
Verfasst: 2. Aug 2018, 14:50
Hallo NEUES Forum,
erst mal ein Dankeschön an die Leute, die dieses Forum ins Leben gerufen haben!
Meine erste Frage ist allgemeiner Natur, aber sicher für viele nicht uninteressant.
Was haltet ihr von dem folgenden Vorgehen. Es stammt aus einem US-Forum und wurde
dort von einem Forums-Urgestein (wohl auch jemand mit grosser Trainererfahrung) erstellt:
____________________________________________________________________________________________________________________________
1.Put a stiff plunger in so it doesnt move at all.
2. set arrow centershot directly in line with string.
3. Line the string and sight and arrow up.
4.Shoot bareshaft and fletched at 20 yards minimum. The important part arrows land in the same group, not important if left , right or centered.
5. Adjust tiller bolts until bareshaft is with fletched. (if you cant get this to happen, arrows will not work for this current limb,
then your arrow spine is wrong).
when bareshafts and fletched group together
6.Then replace plunger with normal working plunger.
7.adjust center shot of arrow to just outside of string.
8.Adjust plunger until arrows hit in center of target.
9.do walkback tune from 50 yards to 5 yards. adjust centershot for arrows to hit centered at all distances. ( this is assuming your sight is straight up and down).
done.
Any other way is not a tune for multiple distances or forgiveness/ grouping.
______________________________________________________________________________________________________________________________
erst mal ein Dankeschön an die Leute, die dieses Forum ins Leben gerufen haben!
Meine erste Frage ist allgemeiner Natur, aber sicher für viele nicht uninteressant.
Was haltet ihr von dem folgenden Vorgehen. Es stammt aus einem US-Forum und wurde
dort von einem Forums-Urgestein (wohl auch jemand mit grosser Trainererfahrung) erstellt:
____________________________________________________________________________________________________________________________
1.Put a stiff plunger in so it doesnt move at all.
2. set arrow centershot directly in line with string.
3. Line the string and sight and arrow up.
4.Shoot bareshaft and fletched at 20 yards minimum. The important part arrows land in the same group, not important if left , right or centered.
5. Adjust tiller bolts until bareshaft is with fletched. (if you cant get this to happen, arrows will not work for this current limb,
then your arrow spine is wrong).
when bareshafts and fletched group together
6.Then replace plunger with normal working plunger.
7.adjust center shot of arrow to just outside of string.
8.Adjust plunger until arrows hit in center of target.
9.do walkback tune from 50 yards to 5 yards. adjust centershot for arrows to hit centered at all distances. ( this is assuming your sight is straight up and down).
done.
Any other way is not a tune for multiple distances or forgiveness/ grouping.
______________________________________________________________________________________________________________________________